Acrylic Thickener Agent for Textile Pigment Printing Rt

Model NO.: Acrylic Thickener Agent for Textile Pigment Printi


Kind: Thickener


Application: Textile Printing Auxiliary, Dying Auxiliary, Post-Processing Auxiliary


pH: 6-7


Trademark: Ruiguang


Origin: Weifang China




Color: Milky White to Yellowish Sticky Liquid


Appearance: Liquid


Ionicity: Anionic


Solid Content: 38-40%


Specification: Highest Quantity




Pigment Printing Thickener RT

1) General Description

This Thickener for Pigment Printing is an anionic acrylic polymer, serving as printing carrier in coating printing on textiles.

2) Technique Data

Appearance Solid content Viscosity PH value

yellowish viscous liquid 36±2% 55.000~80.000mpas 6~7 (Acceptable PH 4~12)

Thickening capability,

Mix with water,2.3~3% dosage,rotary viscosity can be higher than 22pa.s.

3) Property and features

Good fluidness, easy to mix with other water-based materials.

Strong water cohesive and thickening capability under high-speed stirring.

High consistency with printing Binder, pigment pastes and other textile printing auxiliaries.

If pigment doesn't reach enough consistency, then thickener can be added, which won't have ill impact on printing result.

High thickening capability. 3% in flat screen printing and less than 2.5% in rotary screen printing.

High quality stabilization. Free from dilution or bad smell.

Good color yield, sharp definition and soft hand feeling.

Bring thickening effect to printing paste, and the prepared paste can mix with all kinds of oil-covering water-based paste.

Applicable also in bringing better thickening effect to rubber paste, transparent paste, color-printing paste, if consistency is not high enough.

4)Usage

1. On preparing printing paste, add appropriate dosage to measured water and stir at high speed until reaching required consistency.

2. In case printing paste is not viscous enough, then add some RT when stirring.

5) Safety Notes

1. Thickening ability in soft water is better than that in hard water.

2. Don't mix with cationic auxiliaries.

3. One year of guarantee under storage temperature 0-40°C.

4. Please use cloth or soft paper to clean when getting blotched by thickener, and wash with salt electrolyte and water.

Contact us if you need more details on Pigment Printing Thickener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Thickener for Pigment Printing、Synthetic Thickener. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pigment Printing Thickener